Gorge Classified
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
Iron Bull 7×14, 48″ sides
$11,900

• LIGHT RESIDENTIAL USE ONLY! ONE YEAR OLD, LESS THAN 1,000 MILES.
• Side Armor introduces a fully enclosed top rail made of 11-gauge steel to safeguard against potential damage during side loading.
• Dual layer of 6″ I-beam weighing in at 12 pounds per ft main frame construction. That’s 24 lbs/ft of pure steel putting maximum strength into the most critical part of your trailering system.
• Heavy Duty Fenders
• Lockable toolbox with built-in battery charger
• Heavy Duty Ramps
• Double 7 Gauge Steel Flooring
• Full Length Bed Runners & Ramp Pockets (The floor will not deform from transporting heavy equipment, etc!)
• 4” Tubing Bed Frame
• 3 x 3/16” Channel Crossmembers
• 10 Gauge 48″ Steel Sides
• Retractable Tarp in perfect condition
• 10k Drop-Leg Jack
• 2 5/16” Adjustable Coupler
• (2) 7k Cambered Brake Axles
• Multi-leaf Slipper Spring Suspension
• Black Mod Wheels
• Radial Tires
• Spare Tire Mount and Brand New Spare!
• Slide-in Ramps
• Rear Support Stand Bracket
• Three-Way Spreader Gate!
• Powdura Powder Coat & One Cure Primer
• Scissor Hoist with 516 Cylinder
• Double Acting Pump Unit w/ Gravity Down!
• Flow Control Valve
• Locking Pump Box
• Standard Heavy Duty Stake Pockets
• Weld On Diamond Plate Fenders that will not bend under your weight
• Four Floor Mounted 5/8” D-Rings
• DOT Approved Lifetime LED Lighting
• Molded Sealed Harness with Resistors
• Built-In 5 amp Battery Charger
• 7-Way Receiver Female Plug w/ Adapter

Overview

Features:

  • • LIGHT RESIDENTIAL USE ONLY! ONE YEAR OLD, LESS THAN 1,000 MILES.
  • • Side Armor introduces a fully enclosed top rail made of 11-gauge steel to safeguard against potential damage during side loading.
  • • Dual layer of 6" I-beam weighing in at 12 pounds per ft main frame construction. That's 24 lbs/ft of pure steel putting maximum strength into the most critical part of your trailering system.
  • • Heavy Duty Fenders
  • • Lockable toolbox with built-in battery charger
  • • Heavy Duty Ramps
  • • Double 7 Gauge Steel Flooring
  • • Full Length Bed Runners & Ramp Pockets (The floor will not deform from transporting heavy equipment, etc!)
  • • 4” Tubing Bed Frame
  • • 3 x 3/16” Channel Crossmembers
  • • 10 Gauge 48" Steel Sides
  • • Retractable Tarp in perfect condition
  • • 10k Drop-Leg Jack
  • • 2 5/16” Adjustable Coupler
  • • (2) 7k Cambered Brake Axles
  • • Multi-leaf Slipper Spring Suspension
  • • Black Mod Wheels
  • • Radial Tires
  • • Spare Tire Mount and Brand New Spare!
  • • Slide-in Ramps
  • • Rear Support Stand Bracket
  • • Three-Way Spreader Gate!
  • • Powdura Powder Coat & One Cure Primer
  • • Scissor Hoist with 516 Cylinder
  • • Double Acting Pump Unit w/ Gravity Down!
  • • Flow Control Valve
  • • Locking Pump Box
  • • Standard Heavy Duty Stake Pockets
  • • Weld On Diamond Plate Fenders that will not bend under your weight
  • • Four Floor Mounted 5/8” D-Rings
  • • DOT Approved Lifetime LED Lighting
  • • Molded Sealed Harness with Resistors
  • • Built-In 5 amp Battery Charger
  • • 7-Way Receiver Female Plug w/ Adapter

Location

97058,The Dalles

Leave a Review

Your email address will not be published. Required fields are marked *